DAEYEONG M.T.C
우수한 품질의 제품생산을 통해 책임있는 기업으로
제품사양
● ST Series The hydraulic servo actuator is mounted at the upper part of the cross head. These systems are suitable for structures and other large samples in addition to test pieces. The standard type is applicable to the capacity of 300kN max. |
Type |
ST-1 |
ST-3 |
ST-5 |
ST-10 |
ST-20 |
Max. dynamic load (kN) |
±10 |
±30 |
±50 |
±100 |
±200 |
Max. static load (kN) |
±12 |
±35 |
±58 |
±116 |
±230 |
Max. stroke |
±50 or ±100mm | ||||
Controlled variable |
Load . Stroke | ||||
Measuring range |
100, 50, 20% and 10% of dynamic capacity | ||||
Load measurement accuracy |
Within ±1.0% or reading value or ±0.2% of full scale in each measuring range | ||||
Stroke measurement accuracy |
Within ±1.0% of full scale in each measuring range | ||||
Control stability |
Within ±1.0% of each full scale range | ||||
Construction |
Double column (hard chrome plated finish) upper actuator type | ||||
Testpiece interval |
0~800mm | ||||
Crosshead movement |
Movement by hydraulic cylinder | ||||
Crosshead clamping to column |
Hydraulic friction clamping | ||||
Rigidity at 500mm interval of crosshead and table |
0.02mm/t |
0.01mm/t |